마란츠 PM-64mk2 인티앰프입니다.

220V

30W까지 A 클래스 구동, 그 이후엔 AB 클래스

시원한 고음, 탄탄한 저음,

정격출력 100+100W

포노단 MM,MC

CD/PHONO 다니렉트 버튼

CD, TUNER, AUX1, AUX2, TAPE1, TAPE2

스피커 두조 지원합니다.

기능 전혀 이상없습니다.

세월의 흔적들 있습니다.(실사참조)

가격대비 좋은 성능으로 장터에 잘 나오지 않는 제품입니다.

저렴하게 착불 15 만원입니다.

직거래는 1호선 온수역, 천왕역 인근

011-250-4011

 

 

 

 

Description :

The Marantz PM-64 mk2 is the junior model in Marantz's top of the range Quarter A series, being a slightly down-spec of the PM-84 with the MOSFETs of the PM-84 and PM-94 replaced with regular output devices and with a simpler MC stage. A well designed amplifier in 1987, it runs in Class A up to quarter power. It gets very warm even at idle mode. The amplifier delivers 115 + 115 watts into 8 ohms and 170 + 170 watts into 4 ohms. The dynamic power of 225 watts per channel which is ample enough for most speakers. Due to its innovative "Quarter A" circuitry, the distortion rates are extremely low. The Marantz PM-64 mk2 is equipped with two sets of speaker output terminals, 6 high level inputs and an excellent phono MM/MC input section. The input and output jacks are located on the rear panel. The stereo pairs of shiny round jacks such as used for the phono inputs are RCA phono jacks, and they are designed to accommodate shielded audio cables outfitted with RCA phono plugs. The features allows playback, recording, tape monitoring and dubbing operation.

 

Specifications :

MM Cartridge Input

Frequency Response........................+/- 0.5dB (IEC RIAA)

Signal-to-Noise Ratio........................86dB (IEC A weighted)

Input Impedance...............................47k ohms

Input Capacitance.............................200pF

Input Sensitivity................................2.5mV

Equivalent Input Noise.......................0.25 microvolt

Dynamic Range................................113dB

MC Cartridge Input

Input Sensitivity................................250 microvolts

Input Impedance...............................100 ohms

CD-Tuner-Tape Input

Input Impedance...............................20k ohms

Input Sensitivity................................150mV

Frequency Response........................10Hz to 70kHz (+0, -1 dB)

Signal-to-Noise Ratio........................96dB(IEC A weighted)

IHF Dynamic Power..........................225 watts at 4 ohms, 146 watts at 8 ohms

Power Output Per Channel................DIN 4 ohms: 160 watts

.................RMS 4 ohms: 105 watts (20Hz to 20kHz)

................DIN 8 ohms at 1kHz: 115 watts

.................RMS 8 ohms: 100 watts (20Hz to 20kHz)

Total Harmonic Distortion..................0.02% at RMS 8 ohms

IM Distortion....................................0.02%

Damping Factor...............................100 at 8 ohms at 1kHz

Tape Output Voltage.........................465mV (Phono MM 7.75mV)

Tape Output Impedance....................220 ohms

Power Requirements.........................N and T versions: 220/240 V AC, 50/60 Hz

........................E version: 110/120/220/240 V AC, 50/60 Hz

Power Consumption.........................380 watts at rated output, both channels operating

Dimensions(w x d x h)......................42 x 37.5 x 16.5cm

Weight............................................12kg

 

Miscellaneous :

Made In...........................................Japan